Heat pump enquiries are slower to convert than boiler enquiries, and most installers know it. A boiler buyer usually has a broken boiler and wants it sorted this week. A heat pump buyer is weighing up a big, unfamiliar decision, and the gap between "fill in the form" and "surveyor on the doorstep" is where most of them quietly disappear.
This article looks at why that happens, using what government research has found about real heat pump buyers, and sets out a follow-up plan that keeps more of them moving towards a survey.
Where heat pump enquiries actually go cold
If you track your enquiries stage by stage, the losses tend to cluster in four places:
- No contact. The enquiry comes in on a Saturday evening and nobody calls until Monday. By then they have filled in two more forms.
- Contact but no next step. Someone has a nice chat on the phone, promises to "send some info", and the conversation never gets to a booked date.
- The research spiral. The homeowner goes away to read about heat pumps, finds a forum thread about high bills or noise, and loses confidence.
- Price shock on the call. They hear a number for the first time on the phone or at the survey and it is nothing like what they had in their head.
Stage 1 is a speed problem and we cover it properly in Missed calls are missed jobs. Stages 2 to 4 are a confidence problem, and that is where heat pumps are different from almost every other trade.
What the research says puts buyers off
The Department for Energy Security and Net Zero's 2026 evaluation of the Boiler Upgrade Scheme (BUS) interviewed people who looked at heat pumps and did not go ahead. Many had strong environmental motives, but their enthusiasm "could weaken or reverse" as they came across concrete information about cost, disruption or installer advice. Some also misunderstood the scheme itself, thinking the BUS was means-tested, or a loan rather than a grant. That confusion led some of them to give up and fit a fossil fuel boiler instead.
Which? found a similar picture in July 2026. In its survey of more than 1,000 homeowners who had looked into heat pumps and decided against them or were undecided, cost was the biggest deterrent, mentioned by almost half. A third said there were "too many long-term uncertainties". Distrust of installers came up too, and only a small share had heard of MCS, although most said it would reassure them once it was explained.
So the people filling in your form are not cold. They are interested but unsure, and every day without a clear answer from you gives the doubts more room.
The fix: answer the doubts before they become reasons to cancel
The government's Heat Pump Ready programme tested different customer journeys and reported that plain, jargon-free messaging improved engagement. One project saw drop-off fall significantly after simplifying its quote page. Another found that some customers did not want a fully digital process and still wanted a real person involved. Both lessons apply directly to an installer's follow-up.
Step 1: Reply in minutes with a next step, not a brochure
The first message should do three things: confirm the enquiry, ask one or two qualifying questions, and offer survey times. If nobody is free to call, an AI assistant can do this by WhatsApp or text, day or night. Eco Green Energy Group, who install solar, batteries and air source heat pumps, used an AI chatbot instead of hiring office staff to book appointments. Their MD, Ewan McNeil, put it simply: "A lot of the enquiries come in at a weekend and late at night. It helps us close more deals."
Step 2: Give a realistic price range early
Hiding the price until the survey feels safe but it costs you surveys. Show a range for typical homes with the BUS grant already deducted (as of November 2026 that is £7,500 for an air source heat pump in most homes, or £9,000 for eligible off-gas homes replacing oil or LPG until 31 March 2027). Ofgem's rules require the grant to be taken off the quote upfront anyway, so show it the same way from the first message.
Step 3: Run a short education sequence
Between the enquiry and the survey, send one useful message every day or two. A sequence that works for heat pumps:
| When | Message | What it answers |
|---|---|---|
| Day 0 | Survey slots plus what the visit involves | "What happens next?" |
| Day 1 | 60-second video of a customer in their own home | "Will it actually keep us warm?" |
| Day 2 | How the grant works, in three lines, with a GOV.UK link | "Is this a loan? Do I qualify?" |
| Day 4 | Running costs explained honestly | "Will my bills go up?" |
| Day 6 | What install week looks like, day by day | "How much disruption?" |
| Day 8 | MCS and consumer code explained, with your reviews | "Can I trust this firm?" |
Keep each one short and written for a homeowner, not an engineer. For the two biggest doubts, running costs and noise, we go deeper in Running costs and noise.
Step 4: Book the survey inside the funnel
Every message should end with the same action: pick a survey slot. If they can book from their phone at 11pm without speaking to anyone, many will. Postcode routing sends the booking to the right surveyor's diary, and reminders the day before cut no-shows.
Step 5: Keep a human in the loop
Automation handles speed and consistency. It should hand over to a person the moment the homeowner asks something specific about their house. The research is clear that people want reassurance from someone who knows what they are talking about.
Measure each stage, not just "leads"
You cannot fix drop-off you cannot see. In your CRM, track for every campaign:
- enquiries received
- contacted within 5 minutes
- survey booked
- survey completed
- quote sent
- sale
If you have plenty of enquiries but few booked surveys, the problem is speed or follow-up. If surveys are booked but not completed, look at reminders and price expectations. If surveys complete but do not sell, that is a quoting and sales issue, covered in Quotes that go quiet.
It also stops you blaming the wrong thing. A campaign that looks "expensive" on cost per lead may be the one that produces the most completed surveys.
What this looks like when it works
Night & Day Renewable Energy, an air source heat pump installer, moved from buying leads to running their own campaign with us. Their cost per lead for air source heat pump leads was £28.24, and turnover grew from £200k to £650k+ in twelve months. As Brad put it: "Right from the off we were getting more leads than we could manage." Getting more leads only pays when the follow-up keeps them moving, which is exactly what the steps above are for.
Want us to look at your drop-off?
If your heat pump enquiries are going quiet before the survey, book a video call with Tom. We will look at where your leads are dropping out and show you how the heat pump system and AI follow-up would work for your area.
Sources
- Evaluation of the Boiler Upgrade Scheme: 2026 Final Report (DESNZ)
- Improving the customer journey for heat pump adoption: lessons from Heat Pump Ready (DESNZ)
- Boiler Upgrade Scheme: what you can get (GOV.UK)
- Boiler Upgrade Scheme: guidance for installers (Ofgem)
- 5 reasons why homeowners aren't buying heat pumps (Which?)
Questions owners ask
How quickly should I contact a new heat pump enquiry?
Within minutes, not hours. The first reply does not need to be a full sales conversation. It needs to confirm you have the enquiry, ask one or two qualifying questions and offer a survey slot. An AI assistant or a well-built automation can do that at 10pm on a Sunday, which is when a lot of heat pump research happens.
Should I give a price before the survey?
Give a realistic range with the Boiler Upgrade Scheme grant already taken off, and explain what moves the number. Buyers who get no idea of cost before the visit are the ones most likely to cancel it. A range filters out people who can never afford it and reassures the ones who can.


