Facebook & Instagram ads

How to write marketing messages that attract the right solar and heat pump customers

Solar marketing messages decide who enquires. How to write ads and pages for solar and heat pump installers that pull in buyers, not freebie hunters.

Tom Spink · Founder, Attain Digital · 21 November 2026 · 7 min read
How to write marketing messages that attract the right solar and heat pump customers

Every installer has run an ad that "worked" and still lost money. Hundreds of enquiries, a team ringing until their ears hurt, and a handful of installs at the end of it. Usually the targeting gets the blame. More often the problem is the message. The words in your ad decide who puts their hand up, long before your setter ever speaks to them.

This article is about writing messages that do two jobs at once: attract the homeowners you want and quietly put off the ones you don't.

Your message is a filter, not just a hook

Most installer ads are written to get as many clicks as possible. That is the wrong target. A message is a filter. Each phrase pulls in one type of person and turns away another.

MessageWho it tends to attract
"Free solar panels, government funded"Renters, people hoping for free kit, people who will not pass a finance check
"Cut your bills by 70%"Sceptics who think it is a scam, and bargain hunters who will hold you to the number
"No money down, start saving today"People who want credit more than they want solar
"Already got solar panels? Add a battery and use more of what you generate"Owners of existing systems with a clear reason to buy
"Off the gas grid and fed up with oil deliveries?"Homeowners with the strongest case for a heat pump

The last two get fewer enquiries. They also get far more surveys per enquiry, because the person reading them has already recognised themselves.

Start with the customer you actually want

Before writing a word, pull up your last 20 sales and look for patterns:

  • Property: house type, roof, heating system, rough age.
  • Situation: retired, young family, working from home, EV on order, just moved in.
  • Trigger: what made them act now? A big bill, a broken boiler, a neighbour's install, an electric car.
  • Words: what did they say on the first call? Write down their phrases, not yours.

That last point matters most. Homeowners do not say "maximise self-consumption". They say "I'm sick of exporting it all for pennies and buying it back at night". If you can put their sentence in your headline, you have done most of the work. For a fuller method, see our piece on the ideal customer profile for solar and heat pump installers.

The five parts of a message that selects

Good installer messages tend to have the same five parts. You do not need all of them in a 125-character primary text, but your ad and landing page together should cover them.

  1. Who it is for. Name them. "Homeowners in Staffordshire with a south or west facing roof." "If you heat your home with oil or LPG."
  2. The trigger, in their words. "Paying for electricity all evening while your panels sat idle all day?"
  3. An honest outcome with proof. A real customer, a real house, a real result. No guarantees and no national averages you cannot back up.
  4. A filter. Something that makes the wrong person self-select out: a typical price range, a requirement ("you'll need to own the home"), or a time frame.
  5. A next step that matches their readiness. Book a survey for the ready buyer, a short quiz or price guide for the one still researching.

Worked examples

These are example wordings to adapt, not scripts to paste. Swap in your own areas, customers and numbers.

Solar and battery, new system

"Most of the homes we fit in Cheshire are 3 and 4-bed semis where someone is home in the day. Here's Dave and Karen in Crewe, six months after their install, showing what their meter has done. Typical systems like theirs come in between £X and £Y, depending on roof and battery size. Want to know if your roof suits? Answer four quick questions."

Why it works: it names the house type, shows a real couple, gives a range so the "free panels" crowd move on, and offers a low-effort next step.

Battery retrofit

"Had solar fitted a few years ago? If most of what you generate goes back to the grid for a few pence, a battery lets you keep it for the evening. We'll look at your last year of usage before recommending anything."

This only speaks to people who already have panels, so you are not paying for clicks from anyone else. See battery retrofit campaigns for the targeting side.

Air source heat pump

"Still on oil? Under the Boiler Upgrade Scheme, a £7,500 grant comes off the price of an air source heat pump, and until March 2027 homes heated by oil or LPG with no mains gas connection can get an extra £1,500. We apply for it for you. First, a 2-minute check to see if your home is suitable."

Grant figures change, so check GOV.UK before every campaign. As of November 2026, GOV.UK lists £7,500 for air source and ground source heat pumps, plus the extra £1,500 for qualifying off-gas homes until March 2027. Note what the message does not say: it never calls the heat pump free. For more on this, read advertising the Boiler Upgrade Scheme without attracting freebie hunters.

Words that attract the wrong people

Cut or rewrite these:

  • "Free" unless something genuinely is free, with no catch.
  • "Government funded" or "government scheme" when you mean a grant towards part of the cost, or a loan through a lender.
  • "Guaranteed savings" or any promise about bills. Savings depend on usage, tariff and design.
  • "Up to" figures that only a tiny share of customers would ever see.
  • Fake deadlines. "Only 3 slots left this month" when it is not true is a quick way to lose trust and, under UK consumer law, can be an unfair practice.
  • Vague value words like "premium", "quality", "trusted". Everyone says them, so they filter nothing.

Make the page say the same thing as the ad

A tight ad that sends people to a generic homepage undoes the filter. The landing page should repeat the same customer, the same trigger and the same next step, then add the detail: what happens at the survey, what affects price, who will turn up, and proof from homes like theirs. This is where most installer websites fall down, and it is why we build websites and landing pages around a single message per campaign rather than one page for everything.

Judge a message by surveys and sales, not leads

The trap is choosing the message with the cheapest cost per lead. Here is an illustrative comparison of two ads with the same spend:

Message A: "Free solar, government funded"Message B: "Battery for homes that already have solar"
Spend£1,800£1,800
Leads120 at £1560 at £30
Surveys booked1018
Sales26
Cost per sale£900£300

Message A looks better in the ad account and worse in the bank. Across the live Meta accounts we manage, cost per lead runs from £11.90 to £36.56 depending on service, area and how tight the qualifying is. The tighter end often costs more per lead and less per job. Night & Day Renewable Energy, an air source heat pump installer we work with, paid £28.24 per lead on their own campaign and grew turnover from £200k to £650k+ in twelve months.

To test messages properly:

  1. Change one thing at a time: the customer you name, the trigger, or the filter.
  2. Run each version long enough to get through to surveys, not just leads.
  3. Tag every lead in your CRM with the ad it came from, so you can see sales by message.
  4. Keep the winner, then try to beat it.

A quick checklist before any ad goes live

  • Could a stranger tell who this ad is for in three seconds?
  • Does it use a phrase a real customer actually said?
  • Is there anything a renter or freebie hunter would read as "free"?
  • Is every number true, sourced and current?
  • Does the landing page repeat the same promise?
  • Will you measure it by cost per sale?

Want help with the words?

Writing messages that sort buyers from browsers is a big part of what we do on Facebook and Instagram ads for solar and battery installers, using video of your own customers rather than stock footage. Book a call and we will look at your current ads and tell you honestly which ones are pulling in the wrong people.

Sources

Questions owners ask

Should solar ads mention price?

A typical range often helps. It puts off people expecting something free and reassures buyers who have budgeted. Use real ranges from your recent jobs, explain what changes the price, and never present an example price as a quote. If you are not comfortable with a range, at least say who the system suits.

Is it wrong to mention grants in heat pump ads?

No, as long as it is accurate. The Boiler Upgrade Scheme grant is real and worth saying. Say what it is, that the installer applies for it and that it comes off the price, rather than implying the heat pump is free. Check GOV.UK for the current amounts before you publish.

Tom Spink
Tom SpinkFounder of Attain Digital. Over ten years running Google and Facebook ads, the last five specialising in renewables and home improvement. About Attain Digital →

Book a video call

Let’s talk about growing your business

No hard sell. No pressure. A straightforward conversation about your business, your area, and whether we can help. If it is a fit, we will explain exactly how the system works. If it is not, we will tell you straight.

Calendar not loading? Open it in a new tab.

Rather message first?
Message Tom on WhatsApp
Book a call