Turning up an ad budget is easy. Turning it up without your cost per sale drifting, your office drowning in enquiries and your install diary slipping to twelve weeks out is the hard part. Most installers who have a bad experience scaling did not get the ads wrong. They grew the front of the business faster than the back.
This post is a practical way to grow installer leads in controlled steps: set your limits first, work out how many leads your business can actually handle, then raise spend with guardrails that tell you when to stop.
If you need to set a budget from scratch, start with working out a Google Ads budget from your job value and close rate. This post picks up from there: you have something working, and you want more of it.
Step 1: Set your cost per sale ceiling
Before you spend another pound, write down the most you are willing to pay in marketing to win one job. Work it out from margin, not from what feels normal.
An illustrative solar example:
- Average job value: £9,000.
- Gross profit after kit, labour and scaffolding: £3,000.
- Share of gross profit you will spend on marketing: say 20%.
- Cost per sale ceiling: £600.
That ceiling is your fixed point. As you scale, cost per lead will move around, and that is fine as long as cost per sale stays under the line. Pure Volts grew ad spend from £2,000 to £20,000+ a month and, in Ali's words, stayed "still within that three to five hundred pound cost per sale". Cost per lead was never the headline. The ceiling was.
Step 2: Work out your real capacity
Next, find the weakest link between enquiry and install. It is rarely the ads. It is usually one of these:
| Stage | Capacity question |
|---|---|
| First contact | How many new enquiries can you reply to within minutes, every day including weekends? |
| Surveys | How many surveys can your surveyors sit per week, including travel? |
| Design and quoting | How many quotes can go out within 48 hours of a survey? |
| Sales follow-up | How many open quotes can your team chase properly? |
| Installs | How many installs per week can your crews do, and how far ahead are you booked? |
Then work backwards. Say you have two crews who can do three installs a week each, so 6 installs a week. If 35% of sat surveys sell, 80% of booked surveys are sat, and 40% of leads book a survey, you need:
6 ÷ 0.35 ÷ 0.8 ÷ 0.4 = about 54 leads a week.
At an illustrative £30 cost per lead, that is roughly £1,600 a week in ad spend to fill those two crews. Spend much more than that and the extra leads have nowhere to go. They wait days for a call, go cold and push your cost per sale over the ceiling.
Step 3: Raise spend in steps, with guardrails
Once you know the ceiling and the capacity, increase spend in modest steps and hold each step long enough to see what it does. A week or two at each level is a sensible minimum, because booked surveys lag behind leads.
At each step, check these guardrails:
| Guardrail | Warning sign | What to do |
|---|---|---|
| Cost per booked survey | Rising week on week | Hold spend, look at the ads and the form |
| Speed to first contact | Slipping past an hour | Hold spend, fix response before adding leads |
| Survey lead time | More than two weeks out | Add surveyor capacity or slow down |
| Quote turnaround | More than 48 hours after survey | Fix design and quoting before scaling |
| Install lead time | Further out than customers will wait | Slow down or add crews |
| Cost per sale | Approaching your ceiling | Stop, find the leak |
If every guardrail is green, step up again. If one goes amber, hold. If one goes red, step back down and fix it. That sounds cautious, but it is what lets you keep growing month after month instead of lurching from boom to bust.
Step 4: Keep the brakes in your hands
Controlled growth needs ways to slow down without switching everything off. Set these up before you need them:
- Postcode control. Shrink or widen the area you advertise to, and route leads by postcode to the right person's diary.
- A waiting list. When install dates stretch out, be honest about it and offer a date, rather than turning leads away or letting them go cold.
- Service mix. If heat pump surveys are full but solar has space, shift budget between them rather than cutting the total.
- Pre-booked capacity. Know how many survey slots are open for the next 14 days at a glance.
Turning ads fully off and on again tends to hurt. Platforms take time to settle after big changes, and you end up with a gap in work a few weeks later. It is usually better to adjust in smaller moves.
Step 5: Know when more budget is not the answer
At some point, adding budget to the same campaign in the same area brings diminishing returns: the cheaper, more interested people have already seen you, and each extra lead costs more. When that happens, you have other ways to grow:
- New areas. Expand the patch carefully, ideally where you already have reviews and installs to show.
- New offers. Battery retrofits for homes that already have solar, or heat pumps for existing boiler customers.
- Your own database. Past enquiries and customers, which cost nothing to reach. See reviving old leads with AI follow-up.
- Better conversion. A higher booking rate or close rate gives you more jobs from the same spend. Often that is the biggest lever, which we cover in why more leads won't fix a broken sales process.
Step 6: Look at the right numbers every week
When you scale, the numbers that matter change speed. Leads and cost per lead move daily. Booked surveys move weekly. Sales and installs move monthly. Look at all three, but make decisions on the slower ones.
A short weekly review:
- Spend and leads, by service and area.
- Cost per booked survey, this week and the last four weeks.
- Average time to first contact.
- Surveys booked for the next 14 days, against capacity.
- Sales and cost per sale, on a rolling 90 days.
- Install lead time.
If you cannot pull that together in ten minutes, fix the reporting before you scale further. Growing spend while blind is how costs get away from you.
Where we fit
This is how we run lead generation for installers. Several clients started on a small test budget, and Pure Volts started at around £2,000 a month. We watch campaigns daily for the first fortnight, then grow spend only as fast as the business behind it can handle, with leads routed to the right diary and every number from ad to sale on a dashboard. Every lead is exclusive to you, and we only work with one installer per area.
Want to grow without the chaos?
Book a free video call with Tom. Bring your current spend, surveys and installs per week, and we will work out your capacity, your cost per sale ceiling and how fast you could sensibly grow in your area, for solar and battery or heat pumps.
Questions owners ask
How fast should an installer increase ad spend?
In steps, not leaps. Raise the budget by a modest amount, then hold it for a week or two and check cost per booked survey and how quickly leads are being contacted. If both hold, step up again. If cost per survey jumps or contact times slip, stop and fix the cause before adding more.
What is a good maximum cost per sale for solar or heat pumps?
Work it out from your own margin rather than copying someone else's. Decide what share of the gross profit on an average job you are willing to spend to win it, then divide. Pure Volts, a solar and battery installer we work with, stayed, in Ali's words, 'still within that three to five hundred pound cost per sale' while scaling.


