Google Ads

How much to spend on Google Ads: working out a budget from your job value and close rate

How much to spend on Google Ads as an installer or trade: a simple budget formula from job value, close rate and target cost per sale, with worked examples.

Tom Spink · Founder, Attain Digital · 19 November 2026 · 8 min read
How much to spend on Google Ads: working out a budget from your job value and close rate

Ask most trade business owners how they set their Google Ads budget and the honest answer is "it felt about right". £500 a month because a mate spends that. £50 a day because the rep suggested it. Then, six weeks in, they decide it "doesn't work" without knowing what working would have looked like.

There is a better way, and it only needs four numbers you either already know or can estimate. This article walks through the maths, with worked examples for different trades, and explains how long to give a budget before you judge it.

The four numbers you need

  1. Average gross profit per job. Not the price. What is left after materials and labour.
  2. Close rate. Of the surveys or quotes you do, how many become jobs?
  3. Booking rate. Of the enquiries you get, how many turn into a survey or quote visit?
  4. Expected cost per enquiry. What a lead from Google costs in your trade and area. If you have no history, use a cautious estimate and correct it after the first month.

If you don't know your close and booking rates, that is the first thing to fix. A CRM with reporting from lead to sale gives you these without guesswork; see tracking every lead to a sale.

Step 1: decide what a job is worth spending to win

Pick the most you are willing to spend on advertising to win one job. A common way is a share of gross profit. If you make £3,000 gross profit on a typical job and you are happy to spend 15% of that winning it, your target ad cost per sale is £450.

Be honest about the share. Spend too little and you won't win enough to grow. Spend too much and you're working for Google.

Step 2: work backwards to cost per enquiry

From your target cost per sale:

  • Target cost per survey = target cost per sale × close rate
  • Target cost per enquiry = target cost per survey × booking rate

With a £450 target, a 1 in 3 close rate and half of enquiries booking:

  • Cost per survey you can afford: £450 × 1/3 = £150
  • Cost per enquiry you can afford: £150 × 1/2 = £75

If Google enquiries in your area cost less than £75, Google Ads can work for you at this job value. If they cost £150, you need to improve your booking or close rate, raise your job value, or find cheaper searches.

Step 3: work out the budget for the jobs you want

  • Jobs wanted per month ÷ close rate = surveys needed
  • Surveys needed ÷ booking rate = enquiries needed
  • Enquiries needed × expected cost per enquiry = monthly ad budget

Then set the daily budget as the monthly figure divided by 30.4. Google says a campaign can spend up to twice its average daily budget on a busy day, but won't charge more than 30.4 times the daily average over a month.

Worked examples

These are illustrative numbers, not benchmarks or results. Swap in your own.

Boiler installerSolar and battery installerRoofer (full re-roofs)
Gross profit per job£1,200£3,500£4,000
Share spent to win a job15%15%12%
Target ad cost per sale£180£525£480
Close rate (of surveys)50%1 in 330%
Booking rate (of enquiries)60%40%50%
Affordable cost per enquiry£54£70£72
Jobs wanted per month1084
Surveys needed202413 or 14
Enquiries needed33 or 346027
Expected cost per enquiry£40£55£60
Monthly ad budgetabout £1,330about £3,300about £1,620
Daily budget (÷ 30.4)about £44about £109about £53

A few things jump out:

  • The boiler firm has the least room. Margins per job are lower, so cost per enquiry has to stay tight. Clean search terms matter a lot.
  • Solar needs the most budget to hit its job target, because its booking and close rates are lower. Improving the booking rate by ten points would cut the budget needed noticeably.
  • The roofer needs few jobs but each one is valuable. The danger is wasted spend on repair and job-seeker searches (see the search terms wasting your budget).

What changes the maths most

Owners usually try to fix the budget by fiddling with bids. The bigger levers are elsewhere:

  • Booking rate. Replying in minutes, not hours, and following up properly. Going from 40% to 55% of enquiries booking cuts the budget needed for the same jobs by over a quarter.
  • Close rate. Better quotes, faster follow-up, proof on the survey.
  • Job value. Selling the battery with the solar, or the smart controls with the boiler.
  • Cost per enquiry. Tighter search terms, better landing pages, local proof.

How long to give it

Google's automation needs data to learn, and your own numbers need time to settle.

  • Weeks 1 to 4: judge search terms and cost per enquiry. Remove waste weekly.
  • Weeks 5 to 8: judge cost per booked survey.
  • Weeks 9 to 12: judge cost per sale, with longer sales cycles in mind.

Commit to a budget you can sustain for at least two to three months. A campaign that is starved, switched off and restarted never learns. Several of our clients started on a small test budget. Pure Volts, a solar and battery installer, started at around £2,000 a month in ad spend and grew to over £20,000 a month as the numbers proved themselves.

Signs the budget is too low

  • Campaign status says "Limited by budget" on your best campaign every day
  • Ads stop showing by mid-afternoon
  • So few enquiries that one good or bad week swings the results wildly

If that's you, either raise the budget or narrow the focus (fewer keywords, smaller area) so the money you have can do its job properly.

Signs it is ready to scale

  • Cost per sale steady below your target for two months or more
  • Google offering more volume at similar cost per enquiry
  • Your team can handle more surveys without the booking rate dropping

Raise budgets in steps rather than doubling overnight, and watch cost per booked survey as you go. Once Google is fed your real outcomes (see offline conversion tracking), it can scale towards jobs rather than calls.

A note on our fees

Your ad budget is paid straight to Google. Any agency fee sits on top and should be counted when you set your target cost per sale. We give our numbers on the call, never on the site, because they depend on how much we run.

If you would like us to run your figures through this maths with you and sense-check the result against what we see in Google Ads accounts, book a video call with Tom. Bring your job value, close rate and last few months of enquiries.

Sources

Questions owners ask

What is a sensible starting Google Ads budget for an installer?

Work it out from your numbers rather than picking a round figure. Take how many extra jobs you want, divide by your close rate and booking rate to find the enquiries you need, then multiply by your expected cost per enquiry. Start at a level you can sustain for at least two to three months.

How long should I give Google Ads before judging it?

Give a new campaign enough time to produce a meaningful number of booked appointments, which for most installers is two to three months at a steady budget. Judge the first few weeks on search terms and cost per enquiry, and the later weeks on cost per booked survey and cost per sale.

Can Google spend more than my daily budget?

Yes, on a given day. Google says a campaign can spend up to twice its average daily budget on busy days, but over a month you won't be charged more than 30.4 times the average daily budget. So set the daily figure from your monthly plan divided by 30.4.

Tom Spink
Tom SpinkFounder of Attain Digital. Over ten years running Google and Facebook ads, the last five specialising in renewables and home improvement. About Attain Digital →

Book a video call

Let’s talk about growing your business

No hard sell. No pressure. A straightforward conversation about your business, your area, and whether we can help. If it is a fit, we will explain exactly how the system works. If it is not, we will tell you straight.

Calendar not loading? Open it in a new tab.

Rather message first?
Message Tom on WhatsApp
Book a call