The Warm Homes loan part of the Warm Homes Plan went live at the end of October 2026, and installer adverts about it appeared within days. A lot of them say things like "0% government loan, apply today" next to a Union flag. Some of those adverts will be fine. Plenty will not, and the problem is rarely the installer's intentions. It is that most installers have never had to think about who is allowed to promote credit, and this scheme puts credit right at the centre of the pitch.
This post is for installers who want to use the scheme in their marketing without creating a problem for themselves, their finance partner or their ad accounts. It is practical guidance from an agency that writes these campaigns, not legal advice. Before anything goes live, check the final wording with your lender or broker's compliance team.
What you are actually advertising
Get the facts straight first, because most bad adverts come from a fuzzy idea of what the scheme is. As of November 2026, according to GOV.UK:
- It is a loan scheme, not a grant. Homeowners borrow and repay. Government support lets participating lenders offer lower rates, with up to a 5 percentage point reduction compared with regular loans, and some products are interest free.
- Homeowners apply to a participating lender, not to the government. They can do that directly, through an installer or retailer arranging finance, or through their mortgage provider.
- The lender does its usual credit and affordability checks. Approval is never automatic.
- The work must be done by an MCS-certified installer, and only certain measures count: heat pumps, solar PV, battery storage, heat network connections, domestic wind and micro hydro. We cover the gaps in what the Warm Homes loan doesn't cover.
- There are maximum loan amounts per measure, for example £15,000 for solar, £15,000 for a battery and £20,000 for an air-to-water heat pump.
If your advert would make a homeowner believe something that contradicts that list, rewrite it.
Who does what in the scheme
The scheme rules are clear about roles, and your marketing should follow them.
| Role | What they do | What that means for your ads |
|---|---|---|
| Lender | Designs the loan, approves the borrower, markets its own product with the "Funded by UK Government" branding | Finance details and scheme branding belong on the lender's material |
| Installer | Surveys, quotes, installs, registers the job with MCS | You sell the installation and explain the finance route |
| Credit broker or intermediary | Arranges finance between customer and lender, if authorised | Only an authorised firm (or its appointed representative) should be promoting the credit itself |
| Government | Funds the rate reduction, publishes information on GOV.UK | It does not lend, approve or endorse any installer |
The branding point catches people out. The scheme rules say lenders must use the "Funded by UK Government" branding when marketing products supported by the scheme, and once onboarded they may say "This product is supported by the Warm Homes Loan Scheme". The Department can require any lender to stop using the branding, or remove it immediately. That branding pack is for lenders. If you put government logos or crests on your installer adverts, you are implying an endorsement you do not have.
Are you promoting credit?
This is the question to answer before you write a single line. There are broadly three positions an installer can be in:
- You mention the scheme exists and point people to GOV.UK or a lender. You are not arranging finance. Your adverts should stay factual and general.
- You offer point-of-sale finance through a lender or broker. The scheme rules list embedded or point-of-sale finance offered with installers as a supported product type. To arrange it you normally need to be authorised by the FCA for credit broking yourself, or be an appointed representative of a firm that is. Your partner will give you rules for how you can advertise their products.
- You are tied to one lender's installer network. Some lenders only work with specific installers. The same credit-broking question applies, and the lender will usually supply approved wording. See whether to become a lender's partner installer.
If you are in position 1 and your adverts read as if you are in position 2, that is where the trouble starts.
Rules of thumb for the wording
The FCA's guide for credit brokers sets out the basics. Promotions must be clear, fair and not misleading. Brokers must make clear they are a broker, not a lender. If an advert mentions a weekly or monthly payment, it must include a representative example that is no less prominent. Firms must not suggest the FCA has approved or endorsed an advert. The FCA has also consulted (CP26/15, April 2026) on simplifying the consumer credit promotion rules, so check what is in force when you write.
In practice, that turns into a simple wording table.
| Avoid | Why | Use instead |
|---|---|---|
| "Free solar with the government scheme" | It is a loan that must be repaid | "Spread the cost with a Warm Homes loan from a participating lender" |
| "0% government loan" | Not every product is interest free, and government is not the lender | "Some Warm Homes loans are interest free. Rates depend on the lender and your circumstances" |
| "Get approved today" | Lenders decide, after credit checks | "Finance is subject to the lender's credit and affordability checks" |
| "Only £39 a month" | A monthly figure triggers a representative example | Leave payments out, or use the representative example your finance partner supplies |
| "Government approved installer" | There is no such status | "MCS-certified installer" (if you are) |
| Union flag, crest or "Funded by UK Government" mark | Branding is for onboarded lenders | Your own branding and a link to GOV.UK |
Two more habits help. Link straight to GOV.UK for the detail rather than paraphrasing rules that may change, and put "as of" dates on anything time-sensitive, such as loan caps or the lender list.
Where the claims should live
A good structure keeps you selling the job, not the loan:
- The ad sells the outcome: lower bills, warmer home, cheaper power from the roof. It can mention that finance options, including the Warm Homes loan scheme, may be available.
- The landing page explains the scheme in plain English, says what it covers and what it doesn't, and states that finance comes from a participating lender subject to checks. We build these as quiz funnels; see Warm Homes loan landing pages and quiz funnels.
- Specific finance figures (rates, terms, representative examples) come from the lender or broker and sit on their pages or in material they have approved.
This also makes life easier on the ad platforms, which have their own rules for anything that looks like a loan advert. We cover those separately in Meta and Google ad rules for loan and grant messaging, because they are a different problem from the legal one.
A pre-launch checklist
Run every Warm Homes advert, landing page and follow-up message through this before it goes live:
- Does anything say or imply it is free, a grant or government money? Fix it.
- Does anything say or imply you are the lender, or that the government approves applications or installers? Fix it.
- Is there any monthly payment, rate or "0%" figure? If so, has your finance partner approved it, with the required information?
- Are there any government logos, crests or the "Funded by UK Government" mark? Remove them.
- Is it clear the loan depends on the lender's checks?
- Does it only promise scheme funding for eligible measures done by an MCS-certified installer?
- Is there a link to GOV.UK for the official detail?
- Do your setters, WhatsApp templates and AI chatbot scripts say the same thing as the ads? Most mis-statements happen in follow-up, not in the ad.
Point 8 matters more than it looks. You can have a perfect advert and still have a setter telling people on the phone that "the government pays for it". Write the scheme script once, train everyone on it, and load the same answers into your automations.
How we run Warm Homes campaigns
For our solar, battery and heat pump clients we keep the ads product-led, build a landing page that explains the scheme accurately, and route finance questions to the client's lender or broker. Every enquiry comes from the client's own campaign, so it is 100% exclusive to them, and we work with one installer per area. If you want to see how that would look for your solar and battery business or heat pump business, including how we write Facebook and Instagram ads around the scheme, book a video call with Tom and we'll check whether your area is open.
Sources
- GOV.UK: Warm Homes Loan Scheme factsheet (27 October 2026)
- GOV.UK: Warm Homes loan: how to apply
- GOV.UK: Warm Homes loan eligibility
- GOV.UK: Warm Homes Loan Scheme rules, September 2026 (PDF)
- FCA: Regulatory guide for credit brokers, section 2
- FCA: CP26/15 Reviewing the financial promotions rules for consumer credit
Questions owners ask
Can I use the Funded by UK Government logo in my installer adverts?
No. The scheme rules give the Funded by UK Government branding to onboarded lenders for marketing their own Warm Homes loan products, and the Department can order it removed at any time. As an installer you can describe the scheme factually and link to GOV.UK, but you should not use the logo or imply you are the scheme.
Can I say 0% finance in a Warm Homes Plan advert?
Only if a specific product you can actually arrange is 0%, you are allowed to promote it, and the advert carries the information the consumer credit rules require. Some Warm Homes loans are interest free, but not all of them, so a blanket 0% claim is likely to mislead. Check the wording with your lender or finance partner first.
Do homeowners apply to the government for a Warm Homes loan?
No. GOV.UK says homeowners apply to a participating lender, either directly, through an installer or retailer arranging finance, or through their mortgage provider. The lender runs its normal credit and affordability checks. Your adverts should never suggest the government is lending the money or approving the application.


