A homeowner gets three solar quotes. One says 4.4kWp with a 5kWh battery. One says ten 440W panels and a 9.5kWh battery. One says "complete solar and storage system" with a single price. The generation estimates differ by a third, the warranties are written in three different ways, and only one mentions scaffolding.
They cannot compare them. So they do what anyone does when they cannot compare: they look at the bottom line and pick the cheapest. If yours is not the cheapest, you lose, even if your system is better value.
This post is about solar and battery quotes specifically: what makes them so hard to compare, how to lay yours out so value is obvious, and how to follow up when a homeowner is weighing three. For the general follow-up plan for quotes that go quiet, see quotes that go quiet.
What homeowners actually find confusing
Sit with a few customers and you hear the same things:
- kW and kWh. Most people do not know the difference between a system's size (kWp) and how much energy it produces or stores (kWh). Battery quotes that list total capacity on one and usable capacity on another make this worse.
- Panel counts versus system size. Twelve panels sounds like more than ten, even if the ten are bigger.
- Generation estimates. Different quotes use different assumptions. A homeowner sees one installer promise far more electricity than another and has no idea which is honest.
- Inverters. Hybrid, string, micro, AC-coupled. To a homeowner these are all "the box".
- Warranties. Product warranty, performance warranty, workmanship warranty, battery warranty by years or by cycles. Most quotes list them in different places and different terms.
- What is included. Scaffolding, bird protection, monitoring, isolators, an EV charger, removal of waste. If one quote includes them and another adds them later, the cheapest quote is not the cheapest.
None of this is the homeowner's fault. The industry presents quotes in whatever format each installer's software spits out.
Make your quote the easiest one to compare
Put a one-page summary at the front
Before any design drawings, shading reports or brochure pages, give them one page with:
| Item | What to show |
|---|---|
| System size | kWp, in one number |
| Panels | Number, wattage, make |
| Inverter | Make, type, in plain words ("hybrid inverter: runs panels and battery together") |
| Battery | Usable capacity in kWh, make |
| Estimated yearly generation | kWh per year, and how it was worked out |
| Included | Scaffolding, bird protection, monitoring app, isolators, waste removal |
| Warranties | Each one, in years, in one table |
| Price | Total, and what VAT rate is applied |
If they only read one page, this is the page.
Explain the two units once
Add one sentence in plain English: "kWp is the size of your system, like the size of an engine. kWh is the energy it makes or stores, like miles driven." It sounds basic. It removes the main source of confusion.
Be conservative with generation
If your estimate is lower than a competitor's because you used the standard method and they did not, say so. "Our estimate uses the standard MCS method for your roof, orientation and shading. If another quote shows a much higher figure, ask how it was calculated." A conservative number that turns out right builds more trust than a big one that does not.
Itemise properly
There is now a practical reason as well. Under the Warm Homes Loan Scheme rules, where a customer applies to a lender directly (rather than through finance you arrange), the lender needs a quote from an MCS-certified installer that is dated within the last six months, addressed to the applicant, on headed paper, shows your MCS number and the full installation address, includes an itemised cost breakdown, and shows the system size in kW. If your standard quote already meets that, it helps finance customers and makes comparison easier for everyone.
Give them the comparison checklist yourself
This feels counterintuitive, but it works. Include a short page called "Comparing quotes? Ask every installer these questions":
- What is the usable battery capacity in kWh?
- How was the generation estimate calculated?
- What exactly is the workmanship warranty, and is it insurance-backed?
- Are scaffolding, bird protection and monitoring included?
- Who installs it: your own team or subcontractors?
- Are you MCS certified for solar and for batteries? (They can check on the MCS website.)
- What happens if something goes wrong in year three?
If your quote answers all seven clearly and the cheaper one does not, the homeowner does the selling for you. You have moved the comparison from price to value.
Send a short video with every quote
A PDF does not talk. A two-minute video of your surveyor walking through the summary page ("here's your roof, here's why we put eight panels on the south side and four on the west, here's what the battery does for you in the evening") answers questions before they are asked, and it is the thing the cheaper installer did not send. We cover the video tactic in video quote follow-ups, and our videography team films the testimonials and install footage that make those videos land.
Follow up on the comparison, not the sale
When a homeowner says "we're just comparing quotes", the follow-up should help them compare, not push for a decision:
- Day 1: the walkthrough video and the one-page summary.
- Day 3: the comparison checklist, with a note saying you are happy to look over other quotes with them.
- Day 6: a short customer story from a similar house with a similar system, ideally with their app showing real generation.
- Day 10: a call from the person who did the survey, not a stranger.
Offering to look over a competitor's quote with them is powerful. Most homeowners have nobody to ask. If you are the one who explains it honestly, even when the other quote is fine, you usually get the job.
Train the "why is yours more expensive?" answer
Your reps will get this question on every comparison. Give them a straight answer that goes back to the summary page: usable battery capacity, generation method, what is included, warranties, and who does the work. Practise it. A rep who explains calmly beats a rep who discounts nervously.
This is exactly the work our sales closers do when they close booked appointments on a client's behalf. A clear quote and a consistent follow-up are what make a high close rate possible. Eco Green Energy Group, a solar, battery and heat pump installer we work with, closes 5 in 10 booked appointments.
Want help with your quotes and follow-up?
Book a free video call with Tom. Bring a recent quote you lost on price, and we will show you where the homeowner probably got stuck and what we would change. See how we work with solar and battery installers.
Sources
Questions owners ask
Should I give homeowners a checklist for comparing other solar quotes?
Yes, if your quote stands up to it. A fair checklist (usable battery capacity, generation estimate and how it was worked out, warranties, what is included) moves the comparison from total price to what they actually get. It also shows you are confident, which is a big part of why people choose an installer.
What should be on the first page of a solar quote?
A one-page summary: system size in kWp, number and wattage of panels, inverter, battery usable capacity in kWh, estimated yearly generation in kWh, what is included, warranties, and the price. Everything else can follow. Most homeowners decide from that first page.


